J L Griffin LLC | Accelerometers | Vibra Metrics

Select Type of Accelerometers

Dry, General Industrial	Severe Chemical Presence
Moderate Chemical Presence	Underwater, Immersion
Moderate Watersplash	Intrinsically Safe
High Temperature <350F,176C, ICP Type	High Temperature <5000F,260C, Charge Type
High Temperature <9000F,482C, Charge Type

Vibra-Metrics designs and manufactures vibration sensing products including world class accelerometers (vibration sensors), accelerometer power supplies, accelerometer switch boxes, online Condition Based Management Systems, and accelerometer accessories.

Moderate Watersplash

1018-1019 Series

This general purpose sensor series is ideal for laboratory shaker testing, high frequency measurements and production screening. Its features include high frequency and low noise performance. Models are available in IsoShield (1018) and case ground (1019) versions. Sensors include a 10-32 x .2" mounting stud; integral on 1018 versions, and removable on 1019 versions. The 1019C version extends performace to 350¡F (177¡C).

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
1018	3Hz-10kHz	250¡F(121¡C)	10 mV/g	500g peak	10-32 Coax, Side	Isolated
1019	3Hz-10kHz	250¡F(121¡C)	10 mV/g	500g peak	10-32 Coax, Side	Case Ground

CBM 2000 Series

This sensor features a low frequency response, high sensitivity, rugged sealed industrial design and internal electronics for cables up to 1000 feet long. The CBM-2000 includes two 10-32 mounting throughbolts.

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
CBM-2000	.1Hz-500Hz	200¡F(93¡C)	1500 mV/g	3g peak	2-Pin	Structures & Bridges

6050 Series

The economy 6050 units offer a broad frequency range and low cost for applications requiring multiple sensors.

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
6050	5Hz-10kHz	250¡F(121¡C)	100 mV/g	75g peak	2 Pin MIL	Splashproof

5102 Series

This accelerometer is designed with the piezo-electric crystal in shear mode, virtually eliminating base strain, thermal transients and other phenomena that are accentuated at low frequencies. It is supplied with a removable, 1/4-28 stud. An optional 2-pin to BNC cable is available.

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
5102	.5Hz-250Hz	200¡F(93¡C)	500 mV/g	10g peak	2-Pin	Very Low Frequency

8002 Guardian Series

The 8002 features an external frequency range, up to 300,000 CPM, capable of capturing all bearing and gear defects, excellent signal-to-noise ratio, plus isolated symmetrical shear mode sensing. All 8002 models include our patented TUFKEM integral cable assemblies for superior water and chemical resistance. A 10-32 captive center throughbolt simplifies mounting. The 8002 sensor line is covered by our Lifetime Partnership Warranty.

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
8002	5Hz-5kHz	250¡F(121¡C)	100 mV/g	50g peak	BNC or Pigtail
8002HS	1.5Hz-5kHz	230¡F(110¡C)	500 mV/g	10g peak	BNC or Pigtail	High Sensitivity

7002 Guardian Series

Perfect for general machinery, for frequencies between 300 to 300,000 CPM, the 7002 includes a 10-32 center throughbolt for easy mounting. All 7002 models include integral cable assemblies for excellent water and chemical resistance. The 7002 series sensors come with a full 2 year Warranty.

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
7002	5Hz-5kHz	200¡F(93¡C)	100 mV/g	50g peak	BNC or Pigtail
7002LF	1.2Hz-5kHz	200¡F(93¡C)	100 mV/g	65g peak	BNC or Pigtail	Low Freq.

6036 Series

The premium model 6036 is suitable for production critical equipment, where high performance is required.

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
6036	3Hz-5kHz	250¡F(121¡C)	100 mV/g	50g peak	2 Pin MIL

9000 Series

They are designed for applications where transducer size must be minimized and a high signal-to-noise ratio must be maintained. These sensors are installed with adhesive (no stud included).

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
9001A	3Hz-20kHz	250¡F(121¡C)	8.5 mV/g	550g peak	10-32 Coax	High Shock
9002A	10Hz-15kHz	230¡F(110¡C)	100 mV/g	50g peak	10-32 Coax	High Output

5300 Series

This model features three independent, isolated accelerometers mounted in a rugged mounting block. The signals are brought out through a single 4-pin connector located on the top of the unit. A single 1/4 x 28 mounting bolt is provided for mounting.

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
5300	3Hz-5kHz	250¡F(121¡C)	100 mV/g	80g peak	4-Pin, Top	Triax

6045 Series

The economy 6045 units offer a broad frequency range and low cost for applications requiring multiple sensors.

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
6045	3Hz-11kHz	250¡F(121¡C)	100 mV/g	75g peak	2 Pin MIL	General Purpose

1000 Series

Designed with a very low mass, these sensors are ideal for high frequency applications. The 1000 sensors are electrically isolated and available with or without a mounting stud.

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
1000	3Hz-15kHz	250¡F(121¡C)	10 mV/g	500g peak	10-32	Isolated, w/Stud

1800 Series

General purpose accelerometers, the 1800 Series were designed for use in many tough locations. They are rated for underwater use with up to 100 foot depth. Stainless steel body and hermetically sealed sensor make the 1800 ideal for paper machines, air handling equipment and heavy machinery. These accelerometers come with a 2-year warranty and NIST traceable calibration. .

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
1800	3Hz-7kHz	250¡F(121¡C)	100 mV/g	75g peak	BNC	Top exit connector
1801	3Hz-7kHz	250¡F(121¡C)	100 mV/g	75g peak	BNC	Side exit connector

1020 Series

Series	Freq. 5%	Max. Temp.	Sensitivity	Amplitude	Connector	Comments
1020S	3Hz-10kHz	250¡F(121¡C)	100 mV/g	50g peak	10-32, Side	Isolated, w/Stud