Home Page Predictive Maintenance Since 1986 Contact Us
Vibration Monitoring Alignment Shims
Infrared Imaging Balancing Weights
MAINTelligence Strobes & Tachometers
Accelerometers Training
Laser Alignment Accessories
Ultrasonic Detection PdM Services
Accessories Header Request For Quote

Select Type of Accelerometers
Dry, General Industrial
Severe Chemical Presence
Moderate Chemical Presence
Underwater, Immersion
Moderate Watersplash
Intrinsically Safe
High Temperature
<350F,176C, ICP Type
High Temperature
<5000F,260C, Charge Type
High Temperature
<9000F,482C, Charge Type

Vibra-Metrics designs and manufactures vibration sensing products including world class accelerometers (vibration sensors), accelerometer power supplies, accelerometer switch boxes, online Condition Based Management Systems, and accelerometer accessories.


Dry, General Industrial

6036 Series

The premium model 6036 is suitable for production critical equipment, where high performance is required.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
6036 3Hz-5kHz 250¡F(121¡C) 100 mV/g 50g peak 2 Pin MIL
6036C 3Hz-5kHz 350¡F(177¡C) 100 mV/g 50g peak 2 Pin MIL High Temp.
6036FM 3Hz-5kHz 250¡F(121¡C) 100 mV/g 50g peak 2 Pin MIL FM Approved
6036LB 3Hz-5kHz 250°F(121°C) 100 mV/g 50g peak 2 Pin MIL Low 7 V. Bias

 

6045 Series

The economy 6045 units offer a broad frequency range and low cost for applications requiring multiple sensors.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
6045 3Hz-11kHz 250¡F(121¡C) 100 mV/g 75g peak 2 Pin MIL General Purpose

6050 Series

The economy 6050 units offer a broad frequency range and low cost for applications requiring multiple sensors.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
6050 5Hz-10kHz 250¡F(121¡C) 100 mV/g 75g peak 2 Pin MIL Splashproof

1030 Series

The Model 1030 is ideal for making high resolution structural and floor vibration measurements for sensitive equipment such as electron microscopes, micro-lithography for semiconductor fabrication, micro-machining and more. It includes a removable 1/4-28 mounting stud.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
1030 1Hz-180Hz 250¡F(121¡C) 7000 mV/g .7g peak SMA Coax, Side Very Low Frequency

CBM 2000 Series

This sensor features a low frequency response, high sensitivity, rugged sealed industrial design and internal electronics for cables up to 1000 feet long. The CBM-2000 includes two 10-32 mounting throughbolts.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
CBM-2000 .1Hz-500Hz 200¡F(93¡C) 1500 mV/g 3g peak 2-Pin Structures & Bridges

5102 Series

This accelerometer is designed with the piezo-electric crystal in shear mode, virtually eliminating base strain, thermal transients and other phenomena that are accentuated at low frequencies. It is supplied with a removable, 1/4-28 stud. An optional 2-pin to BNC cable is available.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
5102 .5Hz-250Hz 200¡F(93¡C) 500 mV/g 10g peak 2-Pin Very Low Frequency

8002 Guardian Series

The 8002 features an external frequency range, up to 300,000 CPM, capable of capturing all bearing and gear defects, excellent signal-to-noise ratio, plus isolated symmetrical shear mode sensing. All 8002 models include our patented TUFKEM integral cable assemblies for superior water and chemical resistance. A 10-32 captive center throughbolt simplifies mounting. The 8002 sensor line is covered by our Lifetime Partnership Warranty.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
8002 5Hz-5kHz 250¡F(121¡C) 100 mV/g 50g peak BNC or Pigtail
8002C 5Hz-5kHz 300¡F(150¡C) 100 mV/g 50g peak BNC or Pigtail High Temp
8002CFM 5Hz-5kHz 300¡F(150¡C) 100 mV/g 50g peak BNC or Pigtail FM Approved
8002HS 1.5Hz-5kHz 230¡F(110¡C) 500 mV/g 10g peak BNC or Pigtail High Sensitivity

7002 Guardian Series

Perfect for general machinery, for frequencies between 300 to 300,000 CPM, the 7002 includes a 10-32 center throughbolt for easy mounting. All 7002 models include integral cable assemblies for excellent water and chemical resistance. The 7002 series sensors come with a full 2 year Warranty.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
7002 5Hz-5kHz 200¡F(93¡C) 100 mV/g 50g peak BNC or Pigtail
7002HG 5Hz-5kHz 200¡F(93¡C) 10 mV/g 500g peak BNC or Pigtail High Shock
7002LB 5Hz-5kHz 200¡F(93¡C) 100 mV/g 40g peak BNC or Pigtail Low Bias
7002LF 1.2Hz-5kHz 200¡F(93¡C) 100 mV/g 65g peak BNC or Pigtail Low Freq.

 

1100 Series

Low profile design, thermal boot and watertight construction make these sensors perfect for moderate to harsh applications. All models include a 1/4-28 removable mounting stud to facilitate installation.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
1136 3Hz-3kHz 200¡F(93¡C) 100 mV/g 70 g Side Exit, Pigtail Rated for Underwater use to 100 foot depth.
1136T 3Hz-3kHz 200¡F(93¡C) 100 mV/g 70 g Top Exit, Pigtail Rated for Underwater use to 100 foot depth.
1136FM 3Hz-3kHz 200¡F(93¡C) 100 mV/g 70 g Side Exit, Pigtail FM Approved
1136TFM 3Hz-3kHz 200¡F(93¡C) 100 mV/g 70 g Top Exit, Pigtail FM Approved

1800 Series

General purpose accelerometers, the 1800 Series were designed for use in many tough locations. They are rated for underwater use with up to 100 foot depth. Stainless steel body and hermetically sealed sensor make the 1800 ideal for paper machines, air handling equipment and heavy machinery. These accelerometers come with a 2-year warranty and NIST traceable calibration. .

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
1800 3Hz-7kHz 250¡F(121¡C) 100 mV/g 75g peak BNC Top exit connector
1801 3Hz-7kHz 250¡F(121¡C) 100 mV/g 75g peak BNC Side exit connector

1020 Series

General purpose accelerometers, the 1800 Series were designed for use in many tough locations. They are rated for underwater use with up to 100 foot depth. Stainless steel body and hermetically sealed sensor make the 1800 ideal for paper machines, air handling equipment and heavy machinery. These accelerometers come with a 2-year warranty and NIST traceable calibration.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
1020S 3Hz-10kHz 250¡F(121¡C) 100 mV/g 50g peak 10-32, Side Isolated, w/Stud
1024-4 3Hz- 5kHz 250¡F(121¡C) 100 mV/g 50g peak Integral Cable, Pigtail Isolated, No Stud
9000 Series

They are designed for applications where transducer size must be minimized and a high signal-to-noise ratio must be maintained. These sensors are installed with adhesive (no stud included).

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
9001A 3Hz-20kHz 250¡F(121¡C) 8.5 mV/g 550g peak 10-32 Coax High Shock
9002A 10Hz-15kHz 230¡F(110¡C) 100 mV/g 50g peak 10-32 Coax High Output
5300 Series

This model features three independent, isolated accelerometers mounted in a rugged mounting block. The signals are brought out through a single 4-pin connector located on the top of the unit. A single 1/4 x 28 mounting bolt is provided for mounting.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
5300 3Hz-5kHz 250¡F(121¡C) 100 mV/g 80g peak 4-Pin, Top Triax
1000 Series

Designed with a very low mass, these sensors are ideal for high frequency applications. The 1000 sensors are electrically isolated and available with or without a mounting stud.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
1000 3Hz-15kHz 250¡F(121¡C) 10 mV/g 500g peak 10-32 Isolated, w/Stud
1000A 3Hz-15kHz 250¡F(121¡C) 10 mV/g 500g peak 10-32 Isolated, No Stud
1000B 3Hz-10kHz 250¡F(121¡C) 1.5 mV/g 2500g peak 10-32 High Shock, w/Stud
1018-1019 Series

This general purpose sensor series is ideal for laboratory shaker testing, high frequency measurements and production screening. Its features include high frequency and low noise performance. Models are available in IsoShield (1018) and case ground (1019) versions. Sensors include a 10-32 x .2" mounting stud; integral on 1018 versions, and removable on 1019 versions. The 1019C version extends performace to 350¡F (177¡C).

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
1018 3Hz-10kHz 250¡F(121¡C) 10 mV/g 500g peak 10-32 Coax, Side Isolated
1019 3Hz-10kHz 250¡F(121¡C) 10 mV/g 500g peak 10-32 Coax, Side Case Ground
3000 Series

The Model 3000 triaxial accelerometer is ideal for light-weight single-point monitoring of vibration in three planes (x-y-z). It has an exceptionally low 10 micr-volt noise floor, a 10 gram total weight and % frequency response out to 7 kHz.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
3000 3Hz-7kHz 250¡F(121¡C) 10 mV/g 500g peak Side 4-Pin
Vibration Monitoring
Infrared Imaging
MAINTelligence
Accelerometers
Laser Alignment
Ultrasonic Detection
Balancing Weights & Alignment Shims
Strobes & tachometers
Training
Accessories
PdM Services

Vibration Monitoring | Infrared Imaging | Grease Analysis | Accelerometers | Laser Alignment | Ultrasonic Detection | Training | Accessories

J L Griffin LLC. ~ E-mail jim@jlgriffin.com ~ 4625-B Turtle Creek Drive, Brookfield, WI 53005 ~ TEL 414.218.8088