Select
Type of Accelerometers
|
Vibra-Metrics
designs and manufactures vibration sensing products including
world class accelerometers (vibration sensors), accelerometer
power supplies, accelerometer switch boxes, online Condition
Based Management Systems, and accelerometer accessories. |
Moderate Chemical
Presence
|
8002
Guardian Series
The
8002 features an external frequency range, up to 300,000 CPM,
capable of capturing all bearing and gear defects, excellent
signal-to-noise ratio, plus isolated symmetrical shear mode
sensing. All 8002 models include our patented TUFKEM integral
cable assemblies for superior water and chemical resistance.
A 10-32 captive center throughbolt simplifies mounting. The
8002 sensor line is covered by our Lifetime Partnership Warranty.
| Series |
Freq.
5% |
Max.
Temp. |
Sensitivity |
Amplitude |
Connector |
Comments |
| 8002HS |
1.5Hz-5kHz |
230¡F(110¡C) |
500
mV/g |
10g
peak |
BNC
or Pigtail |
High
Sensitivity |
|
|
5102
Series
This
accelerometer is designed with the piezo-electric crystal in
shear mode, virtually eliminating base strain, thermal transients
and other phenomena that are accentuated at low frequencies.
It is supplied with a removable, 1/4-28 stud. An optional 2-pin
to BNC cable is available.
| Series |
Freq.
5% |
Max.
Temp. |
Sensitivity |
Amplitude |
Connector |
Comments |
| 5102 |
.5Hz-250Hz |
200¡F(93¡C) |
500
mV/g |
10g
peak |
2-Pin |
Very
Low Frequency |
|
|
|
7002
Guardian Series
Perfect
for general machinery, for frequencies between 300 to 300,000
CPM, the 7002 includes a 10-32 center throughbolt for easy mounting.
All 7002 models include integral cable assemblies for excellent
water and chemical resistance. The 7002 series sensors come
with a full 2 year Warranty.
| Series |
Freq.
5% |
Max.
Temp. |
Sensitivity |
Amplitude |
Connector |
Comments |
| 7002 |
5Hz-5kHz |
200¡F(93¡C) |
100
mV/g |
50g
peak |
BNC
or Pigtail |
|
| 7002LF |
1.2Hz-5kHz |
200¡F(93¡C) |
100
mV/g |
65g
peak |
BNC
or Pigtail |
Low
Freq. |
|
|
1100
Series
Low
profile design, thermal boot and watertight construction make
these sensors perfect for moderate to harsh applications. All
models include a 1/4-28 removable mounting stud to facilitate
installation.
| Series |
Freq.
5% |
Max.
Temp. |
Sensitivity |
Amplitude |
Connector |
Comments |
| 1136 |
3Hz-3kHz |
200¡F(93¡C) |
100
mV/g |
70
g |
Side
Exit, Pigtail |
Rated
for Underwater use to 100 foot depth. |
|
|
1800
Series
General
purpose accelerometers, the 1800 Series were designed for use
in many tough locations. They are rated for underwater use with
up to 100 foot depth. Stainless steel body and hermetically
sealed sensor make the 1800 ideal for paper machines, air handling
equipment and heavy machinery. These accelerometers come with
a 2-year warranty and NIST traceable calibration. .
| Series |
Freq.
5% |
Max.
Temp. |
Sensitivity |
Amplitude |
Connector |
Comments |
| 1800 |
3Hz-7kHz |
250¡F(121¡C) |
100
mV/g |
75g
peak |
BNC |
Top
exit connector |
| 1801 |
3Hz-7kHz |
250¡F(121¡C) |
100
mV/g |
75g
peak |
BNC |
Side
exit connector |
|
|
1018-1019
Series
This general
purpose sensor series is ideal for laboratory shaker testing,
high frequency measurements and production screening. Its features
include high frequency and low noise performance. Models are
available in IsoShield (1018) and case ground (1019) versions.
Sensors include a 10-32 x .2" mounting stud; integral on 1018
versions, and removable on 1019 versions. The 1019C version
extends performace to 350¡F (177¡C).
| Series |
Freq.
5% |
Max.
Temp. |
Sensitivity |
Amplitude |
Connector |
Comments |
| 1018 |
3Hz-10kHz |
250¡F(121¡C) |
10
mV/g |
500g
peak |
10-32
Coax, Side |
Isolated |
| 1019 |
3Hz-10kHz |
250¡F(121¡C) |
10
mV/g |
500g
peak |
10-32
Coax, Side |
Case
Ground |
|
|
1020
Series
General
purpose accelerometers, the 1800 Series were designed for use
in many tough locations. They are rated for underwater use with
up to 100 foot depth. Stainless steel body and hermetically
sealed sensor make the 1800 ideal for paper machines, air handling
equipment and heavy machinery. These accelerometers come with
a 2-year warranty and NIST traceable calibration.
| Series |
Freq.
5% |
Max.
Temp. |
Sensitivity |
Amplitude |
Connector |
Comments |
| 1020S |
3Hz-10kHz |
250¡F(121¡C) |
100
mV/g |
50g
peak |
10-32,
Side |
Isolated,
w/Stud |
| 1024-4 |
3Hz-
5kHz |
250¡F(121¡C) |
100
mV/g |
50g
peak |
Integral
Cable, Pigtail |
Isolated,
No Stud |
|
|
9000
Series
They are
designed for applications where transducer size must be minimized
and a high signal-to-noise ratio must be maintained. These sensors
are installed with adhesive (no stud included).
| Series |
Freq.
5% |
Max.
Temp. |
Sensitivity |
Amplitude |
Connector |
Comments |
| 9001A |
3Hz-20kHz |
250¡F(121¡C) |
8.5
mV/g |
550g
peak |
10-32
Coax |
High
Shock |
| 9002A |
10Hz-15kHz |
230¡F(110¡C) |
100
mV/g |
50g
peak |
10-32
Coax |
High
Output |
|
|
3000
Series
The Model
3000 triaxial accelerometer is ideal for light-weight single-point
monitoring of vibration in three planes (x-y-z). It has an exceptionally
low 10 micr-volt noise floor, a 10 gram total weight and % frequency
response out to 7 kHz.
| Series |
Freq.
5% |
Max.
Temp. |
Sensitivity |
Amplitude |
Connector |
Comments |
| 3000 |
3Hz-7kHz |
250¡F(121¡C) |
10
mV/g |
500g
peak |
Side
4-Pin |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
