Home Page Predictive Maintenance Since 1986 Contact Us
Vibration Monitoring Alignment Shims
Infrared Imaging Balancing Weights
MAINTelligence Strobes & Tachometers
Accelerometers Training
Laser Alignment Accessories
Ultrasonic Detection PdM Services
Accessories Header Request For Quote


Select Type of Accelerometers
Low Cost
General Purpose
Low Frequency
High Frequency
High Temperature
Multi-Axis
Velocity Output Sensor
Temperature Output
Intrinsically Safe Sensor
4-20 mA Sensor

IMI manufactures industrial accelerometers, vibration sensors, 4-20 mA transmitters, and related accessories for predictive maintenance, condition monitoring, and machinery vibration analysis. The instrumentation is used to monitor bearings, gears, motors, spindles, and other rotating machinery in harsh factory environments. A division of PCB Piezotronics, Inc., all IMI products are designed and manufactured in our ISO 9001 certified facility in the U.S.A. Products include 24-hour telephone support and are backed by a Total Customer Satisfaction Guarantee.


Series VO622Ax1
Low-noise, ceramic shear, top connection
High accuracy, high resolution
100 mV/in/sec sensitivity
450 µin/sec resolution
180 to 540k cpm (3 to 9000 Hz) frequency range [±3 dB]
Full NIST traceable calibration from 300 to 270k cpm (5 to 4500 Hz)
2-pin or 3-pin connector and three integral cable styles
Ideal for permanent installations or use with portable data collectors
Series VO625Ax1
Low-noise, ceramic shear, side connection
High accuracy, high resolution
100 mV/in/sec sensitivity
400 µin/sec resolution
90 to 360k cpm (1.5 to 6000 Hz) frequency range [±3 dB]
Full NIST traceable calibration from 300 to 150k cpm (5 to 2500 Hz)
2-pin or 3-pin connector and three integral cable styles
Ideal for permanent installations or use with portable data collectors
Series VO626Ax1
Low-noise, ceramic shear, top connection
High accuracy, high resolution
100 mV/in/sec sensitivity
300 min/sec resolution
90 to 360k cpm (1.5 to 6000 Hz) frequency range [±3 dB]
Full NIST traceable calibration from 300 to 150k cpm (5 to 2500 Hz)
2-pin or 3-pin connector and three integral cable styles
Vibration Monitoring
Infrared Imaging
MAINTelligence
Accelerometers
Laser Alignment
Ultrasonic Detection
Balancing Weights & Alignment Shims
Strobes & tachometers
Training
Accessories
PdM Services

Vibration Monitoring | Infrared Imaging | Grease Analysis | Accelerometers | Laser Alignment | Ultrasonic Detection | Training | Accessories

J L Griffin LLC. ~ E-mail jim@jlgriffin.com ~ 4625-B Turtle Creek Drive, Brookfield, WI 53005 ~ TEL 414.218.8088