Home Page Predictive Maintenance Since 1986 Contact Us
Vibration Monitoring Alignment Shims
Infrared Imaging Balancing Weights
MAINTelligence Strobes & Tachometers
Accelerometers Training
Laser Alignment Accessories
Ultrasonic Detection PdM Services
Accessories Header Request For Quote
Sales Technology, Inc. (STI) specializes in Vibration Monitoring and is a manufacturer of comprehensive Condition Monitoring and Machine Protection Solutions, and has been producing quality vibration sensors and monitoring products since 1989.
CMCP5304 General Machinery Monitor (4 Channels)

  • Two Levels of Alarm with Relays
  • True "OK" Circuitry with Relay
  • Adjustable Time Delays
  • Trip Multiply
  • 4-20 mA Output
  • Buffered Transducer Output
  • Reset Button
  • Bright LED Digital; Readout

    The CMCP5304 is a four channel Vibration Monitor that has been designed for use on typical rotating machinery such as motors, pumps fans, turbines, compressors, chillers., etc. The CMCP5304 accepts inputs from any industry standard 100 mV/g accelerometer, condition's the input signals to velocity and provides a digital display and alarm status indication.

    Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The CMCP5304 alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution.

    The system is a pre-wired turn-key package with panduit, power supply, bright LED display, channel selector switch and reset button. The power supply accepts 110 or 220 VAC, 50 or 60 Hz. The CMCP5304 is available in either an English or Metric configuration. The standard housing is polyester powder coated steel; rated NEMA 12. An optional Stainless Steel enclosure is rated NEMA 4X.

    Electrical Specifications:

    Environmental Specifications:

    Physical Specification:

    Power:110VAC or 220 VAC, 60 or 50 Hz

    Operating Temp.: -20oC to +80oC (-4oF to +176oF).

    Dimensions: 200 mm H x 400 mm W x 150 mm D (7.87" H x 15.75" W x 5.90" D)

    Frequency Response: (-3 dB) 2 Hz to 20 kHz.

    Storage Temp.: -55oC to +125oC (-67oF to +257oF).

    Weight: 6.80 Kg (15 lbs)

    Buffered Output: BNC Connector 0-20 kHz.

    Relative Humidity: 0 - 95% Non-Condensing.

    Accuracy: 0.5 % of Full Scale Range.

    Approvals: NEMA 12, EEMAC, UL508, CSA Type 4, VDE IP66, IEC 529, IP66

    Output: 4-20 mA proportional to the full scale range.

    Maximum Load: 600 Ohms Resistive per channel

    Case: Isolated.

    Ordering Information

    STI Part Number



    4 Channel, 0-1 in/sec PK


    4 Channel, 0-25 mm/sec RMS


    4 Channel, 0-1 in/sec PK, Stainless Steel Enclosure


    4 Channel, 0-25 mm/sec RMS, Stainless Steel Enclosure


    Wing Knob Latch with Key


    Foot Mounting Kit


  • Vibration Monitoring
    Infrared Imaging
    Laser Alignment
    Ultrasonic Detection
    Balancing Weights & Alignment Shims
    Strobes & tachometers
    PdM Services

    Vibration Monitoring | Infrared Imaging | Grease Analysis | Accelerometers | Laser Alignment | Ultrasonic Detection | Training | Accessories

    J L Griffin LLC. ~ E-mail jim@jlgriffin.com ~ 4625-B Turtle Creek Drive, Brookfield, WI 53005 ~ TEL 414.218.8088 ~FAX 262.373.1055