 The CMCP300 series BNC Junction Boxes are multiple channel connecting
centers for terminating the outputs of accelerometers or other
transducer field wiring. They are normally located in close
proximity to the machine to reduce wiring cost and provide convenient
access to the vibration signal by a portable data collector
or analyzer.
The CMCP300 Series Junction Boxes are available in three
(3) versions, "FG" NEMA 4x Fiberglass, "PS"
NEMA 4 Powder Coated Steel and "SS" NEMA 4x Stainless
Steel. Both internal and external switch/BNC models are available.
Internal models are provided with quick access latches and
external models with screw covers and protective caps for
the BNC fitting. In harsh environments internal models should
be specified. Black and white bezel tagging is provided for
channel and switch identification.
CMCP300FG Fiberglass
The CMCP300FG Fiberglass NEMA 4X enclosure made of molded
fiberglass polyester and is easily punched or drilled. It
has outstanding chemical and temperature resistance and physical
properties. A seamless foam in-place gasket assures a watertight
and dust tight seal. Screw covers are secured with captivated
Monel cover screws.
|
CMCP300FG
|
XX
|
XX
|
Fiberglass
NEMA 4X
|
Dimensions
|
|
|
|
1
|
|
1
Channel
|
6.5”
x 6.5” x 4.25”
(16.5 x 16.5 x 10.8 cm)
|
|
|
2
|
|
2
Channels
|
6.5”
x 6.5” x 4.25”
(16.5 x 16.5 x 10.8 cm)
|
|
|
4
|
|
4
Channels
|
8.5”
x 6.5” x 4.25”
(21.6 x 16.5 x 10.8 cm)
|
|
|
6
|
|
6
Channels
|
8.5”
x 6.5” x 4.25”
(21.6 x 16.5 x 10.8 cm)
|
|
|
|
1
|
Internal
BNC
|
|
|
|
|
|
2
|
External
BNC
|
|
|
CMCP310PC
Powder Coated Steel
CMCP310PC
Powder Coated Steel The CMCP310PC Powder Coated NEMA 4 enclosure
is constructed of 14 gauge mild steel and is ANSI 61 gray
polyester powder coated on the all surfaces.
|
CMCP300PC
|
XX
|
XX
|
Powder
Coated Steel NEMA 4
|
Dimensions
|
|
|
|
1
|
|
1
Channel
|
7.5" x 7.0" x 4.0"
(19.05 x 17.78 x 10.16 cm)
|
|
|
2
|
|
2
Channels
|
7.5" x 7.0" x 4.0"
(19.05 x 17.78 x 10.16 cm)
|
|
|
4
|
|
4
Channels
|
9.5" x 7.0" x 3.5"
( 24.13 x 17.78 x 8.89 cm)
|
|
|
6
|
|
6
Channels
|
9.5" x 7.0" x 3.5"
(24.13 x 17.78 x 8.89 cm)
|
|
|
|
1
|
Internal
BNC
|
|
|
|
|
|
2
|
External
BNC
|
|
|
CMCP310SS
Stainless Steel
The
CMCP310SS Stainless Steel NEMA 4X enclosure is constructed
from 14 gauge 304 Stainless Steel.
|
CMCP300SS
|
XX
|
XX
|
Stainless
Steel NEMA 4x
|
Dimensions
|
|
|
|
1
|
|
1
Channel
|
7.5" x 7.0" x 4.0"
(19.05 x 17.78 x 10.16 cm)
|
|
|
2
|
|
2
Channels
|
7.5" x 7.0" x 4.0"
(19.05 x 17.78 x 10.16 cm)
|
|
|
4
|
|
4
Channels
|
9.5" x 7.0" x 3.5"
( 24.13 x 17.78 x 8.89 cm)
|
|
|
6
|
|
6
Channels
|
9.5" x 7.0" x 3.5"
(24.13 x 17.78 x 8.89 cm)
|
|
|
|
1
|
Internal
BNC
|
|
|
|
|
|
2
|
External
BNC
|
|
|
Liquid
Tight Strain Relief Connectors
Liquid
Tight Strain Relief Connectors are used for making direct
accelerometer or transducer extension cable entries into the
BNC Junction Boxes listed above. Long cable runs or cables
other than the actual extension cable should be installed
in conduit. Connectors are constructed of Polyamide and provide
both environmental sealing and strain relief. The connectors
are temperature rated to -40o to 212o F (-60o to 100o C).
The connectors have a pressure rating of up to 150 PSIG.
|
CMCP261
|
XX
|
Liquid
Tight Connectors
|
|
|
Min.
OD
|
Max.
OD
|
|
01
|
0.08"
(2mm)
|
0.20"
(5mm)
|
|
02
|
0.16"
(4mm)
|
0.31"
(8mm)
|
|
03
|
0.20"
(5mm)
|
0.35"
(9mm)
|
|
04
|
0.28"
(7mm)
|
0.47"
(12mm)
|
|
05
|
0.35"
(9mm)
|
0.70"
(18mm)
|
|
06
|
0.51"(13mm)
|
0.78"
(20mm)
|
|
